Wireless Relay Remote Control Switch 433MHz 12V 10A 2CH Channel Remote Control Switch
Product Code: 5271881
Availability: In Stock
Availability: In Stock
$10.99
Ex Tax: $10.99
Ex Tax: $10.99
Product Description
Description:
Wireless Relay Remote Control Switch 433MHz 12V 10A 2CH Channel Receiver Module Remote Control Switch
Specification:
Model | C-1202-A1 |
Input Voltage | DC 12V |
RF Frequency | 433MHZ |
RF Working mode | Super heterodyne receiver |
Receiver Sensitivity | -105dBm |
Remote Control Distance | ≦100 meter(In open environment) |
Decoding Way | Learning Code |
Modulation mode | ASK |
Channel | 2CH |
Load power | 800W / CH |
Quiescent current | 8mA |
Total load power | 10A |
Multiple working modes | Jogging / Self-locking / Interlocking |
Dimension | 54x74x25mm |
Quantity | 1pc |
Code Learning
1, press the code button on the control panel once, LED indicator light flashes, press the code on the remote control button, the control panel LED light flashes 3 times, the first relay switch to learning the code successfully.
2, press the code button on the control panel once, LED indicator light flashes, press the code on the remote control button, the control panel LED light flashes 3 times, the second relay switch learnning the code successfull.
3, press the code button on the control panel once, LED indicator light flashes, press the code on the remote control button, the control panel LED light flashes 3 times, the close switch learning the code successfully.
Clear Data:
Press the learning button on the control panel to 5 times, until the LED indicator flashes to complete, then, clear all the remote control learnt code automatically. After clean up, the original learnt code on the remote control will no longer be controlled.
Work Mode Description:
1, Set as jogging output: unplug the jumper cap on the board.
2, Set as self-locking output: short connect the board jumper cap to "T" and the middle of the pin.
3, Set as interlock output: short connect the board jumper cap to "L" and the middle of the pin.
Output Mode Explanation:
1, Self-locking: press the same remote control button, click, relay open, and then click, the relay is off.
2, Interlock: press the remote control "A" key, the relay is on, press the remote control "B" key, the relay is off.
3, Jogging: press the remote control "A" key, the relay is on, release the remote control "A" key, the relay is off. If you always press the remote control "A" button, the relay will turn on, when to release the remote control, then the relay on the off.
Package Included:
1pc x 433MHZ 12V 2 Channel Wireless Relay Switch
Notice:
1. Please allow a bit error due to manual measurement. please make sure you do not mind before you bid.
2. The color may have different as the difference display, pls understand.
More Details: